CONTACT US

Email:manager@jpdxsteel.com

Tel: 86-22-58883805

Home > Products > Tinplate

Tinplate

The Tinplate specification as following: 1, Reference standard: GB2520-88, JIS G3303-1997 and DIN EN10203-91 2, Material: MR, 3, Thickness available: 0.18mm to 0.45mm 4, Width available: 600mm to 980mm 5, Temper grade: T1 - T5 BA and CA both. 6, Tin coating: ordinary 2.8g/2.8g, 5.6g/5.6g, We also can produce according to customers' requests 7,Coil diameter: ID 420/ 508mm, OD from 1,000 to 1,250mm 8,Package: Anti-rust paper,corner protected. by sheet or coils according customer's require. 9, Applications: metal package usage like paint, chemical can,aerosol can and different food can production, Also battery,electric cable and other industries

 

Standard for temper
Chinese StandardJapanese StandardAmerican Standard European Standard
GB/T 2520-2008JIS G3303-2008ASTM A623M-06aDIN EN10202-2001
T-1 T-1T-1 (T49)TS230
T1.5
T-2T-2T-2 (T53)TS245
T-2.5T-2.5
TS260
T-3T-3T-3 (T57)TS275
T-3.5TS290
T-4T-4T-4 (T61)TH415
T-5T-5T-1 (T65)TH435
DR-7MDR-7.5TH520
DR-8DR-8DR-8TH550
DR-8MDR-8.5TH580
DR-9DR-9DR-9TH620

 

Tinplate specifications
Steel Type      SPCC, MR
Temper(BA&CA)     T1~T5
Coating     1.1~11.2g/m2
Thickness and tolerance     0.15~0.50mm(Tolerance: _+0.01 mm)
Width & tolerance      300~1000mm (Tolerance: 0~3mm)
Cut length & tolerance        450~``50mm (Tolerance: 0~3mm )
Coil inside diameter      420/508mm
Coil Weight        3~10 MT
Passivation        311
Oiling              DOS
Surface Finish      Bright, Stone, Silver, Matte
Packaging            Seaworthy Standard with wooden pallet
Standards Available      GB/T2520, JIS G3303, ASTM A623M & EN10202
Special specitications are available on request.
Tin coating weight
TypeDesignation of tin       coating weightMin.average tin coating weight(g/m2)Former Coating Designation
Equal tin coating1.4/1.41.2/1.2#15
2.2/2.22.0/2.0#20
2.8/2.82.45/2.45#25
5.6/5.65.05/5.05#50
8.4/8.47.55/7.55#75
11.2/11.210.1/10.1#100
Differentially Coating1.4/2.81.2/2.45#15/25
2.2/2.82.2/2.45#20/25
2.8/5.62.45/5.05#25/50
2.8/8.42.45/7.55#25/75
2.8/11.22.45/10.1#25/100
5.6/8.45.05/7.55#50/75
5.6/11.25.05/10.1#50/100
8.4/11.27.55/10.1#75/100
Surface finish
Surface finishNominal surface roughness (um Ra)Characteristic
Bright finish≤Q0.35Glazed surface obtained after melting treatment of electrotinned smooth raw materail strip with extremely fine rubstone fingure by processing.
Stone finish0.25~0.60Glazed surface obtained after melting treatment of electrotinned smooth raw materail stripfeaturing certain rubstone figures.
Silver finish0.50~1.00Glazed surface obtained after melting treatment of electrotinned smooth raw material strip with rough matt furface.
Matte finish0.80~2.50Matt surface of general matt raw material strip without melting treatment


Copyright 2014 TISCO. All Rights Reserved.

Content Us | Powered by Hicheng