CONTACT US

Email:manager@jpdxsteel.com

Tel: 86-22-58883805

Home > Products > Carbon Steel

S355J2-Z25

S355J2-Z25

S355J2 / S355J2+N EN 10025-2 : 2004 STRUCTURAL STEEL PLATE

Hot Rolled Steel Plates 
S355J2 / S355J2+N
EN 10025-2 : 2004 
ASTM E290-97a
NACE MR-0175 / ISO 15156 
Condition : Fully Killed, Normalized, Stress-Relieved (PWHT) Post Weld Heat Treatment 
Steel Making Process : Open Hearth Furnace / Basic Oxygen Furnace (BOF), Ladle Refining Furnace (LRF), Vacuum Degassed (VD)
Vacuum Treated, Fully Deoxidised, Desulpherised, Dephosphorised
Charpy V-notch Impact Tested Longitudinal 27 Joules @ - 20 deg.C
Size tolerance as per EN 10029:1991 
Positive thickness tolerance as per EN 10029:1991 Table 1, Class A 
Flatness Tolerance as per Table 4, Class N, Category L of EN 10029-1991 
Surface Quality as per EN 10163:1991 Part 2, Class A, Subclass-3
Edges : Trimmed / Mill Edge 
Ultrasonic as per ASTM A578/578M Level A / Level B
Grain size No.6-8 or finer acc. to ASTM E112-96 
Mill certificate acc. to EN 10204 3.1 / EN 10204 3.2 


We mainly stock the Plates of following make : 

Azovstal Iron & Steel - Ukraine 
Alchevsk Iron & Steel - Ukraine 
Ilyich Iron & Steel - Ukraine  
ArcelorMittal Steel - Romania 
Thainox Steel - Taiwan 
Iscor - South Africa 
Salzgitter Mannesmann - Germany 
ThyssenKrupp Steel - Germany 
ThyssenKrupp Stahl - Germany 
Dillinger Hutte - Germany 
Rautaruukki - Finland 
Voestalphine Grobblech - Austria 
Corus - U.K 
Posco - Korea 
InduSteel - France 
InduSteel - Belgium 
SSAB - Sweden
Sumitomo - Japan
Kobe Steel - Japan 
JFE Steel - Japan 
Japan Steel - Japan  
Nippon Steel - Japan 
Severstal - Russia 
SAIL - India 
Jindal Steel - India 
TATA Steel - India 

Inspection & Approval Certificates : EN10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate, NACE MR-01-75 / ISO 15156, CE Marked, European Pressure Equipment Directive PED-97/23/EC, AD-2000-W0, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, with 3.2 certificate duly Certified & Approved by LRS (Lloyd's Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS, NORSOK Approved Standard M-630, M-650 Rev.3

We are in this line from the last 25 years and supplying materials to all over the country. Most of our clients are govt.of india & public undertaking companies to defence, fertilizer, chemical, thermal power semi govt.and public sector departments.


Copyright 2014 TISCO. All Rights Reserved.

Content Us | Powered by Hicheng