CONTACT US

Email:manager@jpdxsteel.com

Tel: 86-22-58883805

Home > Products > Martensite

1.4034 / 1.4021 / SS420

420 is suitable for heat treatment up to 52 HRc or higher depending on the carbon content and size of the component. European grade 1.2083 is a high carbon type 420 stainless and is ideally suited for application where highest achievable hardness is required.

Related Specifications
1.4021 1.4028 1.4034 1.2083 ASTM A276 S42000
BS EN 10088 AISI BS970 UNS X20Cr13 X30Cr13


Analysis 420S29
Carbon0.14-0.20%Chromium11.50-13.50%
Manganese1.00% maxSulphur0.030% max
Silicon1.00% maxPhosphorous0.040% max
Nickel1.00% maxMolybdenum0.300% max

Analysis 420S37
Carbon0.20-0.28%Chromium12.00-14.00%
Manganese1.00% maxSulphur0.030% max
Silicon1.00% maxPhosphorous0.040% max
Nickel1.00% maxMolybdenum0.300% max

Analysis 420S45
Carbon0.28-0.36%Chromium12.00-14.00%
Manganese1.00% maxSulphur0.030% max
Silicon1.00% maxPhosphorous0.040% max
Nickel1.00% maxMolybdenum0.300% max

Analysis 1.2083
Carbon0.36-0.42%Chromium12.50-14.50%
Manganese1.00% maxSulphur0.030% max
Silicon1.00% maxPhosphorous0.030% max

Analysis 1.4034
Carbon0.43-0.50%Chromium12.50-14.50%
Manganese1.00% maxSulphur0.015% max
Silicon1.00% maxPhosphorous0.040% max

Form of Supply

TISCO Steel are suppliers and stockholders of round bar. Diameters can be sawn to your required lengths as one offs or multiple cut pieces. 420 ground steel bar can be supplied, providing a high quality precision ground finish to your close tolerances. 420 stainless steel plate and sheet are available to European steel grades 1.2083 and 1.4034, which can be supplied as full plates and sheets or can be cut to your requirements.





SheetPlateDiameter

Applications

420 stainless is widely used in the medical and cutlery industries. It is suitable for applications such as instruments, knives, hand tools, pump shafts and plastic moulds. 420 is not recommended for use in temperatures above the relevant tempering temperature, because of the reduction in mechanical properties.


Corrosion Resistance

Best corrosion resistance of 420 stainless is achieved when 420 is hardened and surface ground or polished. In the hardened condition 420 has good corrosion resistance to atmosphere, foods, fresh water, mild alkalis and acids, steam, crude oil and other similar corrosive media. 


Hardening

420 is suitable for heat treatment up to 52 HRc or higher depending on the carbon content and size of the component. European grade 1.2083 is a high carbon type 420 stainless and is ideally suited for application where highest achievable hardness is required. 


Heat Treatment

Heat treatment temperatures, including rate of heating, cooling and soaking times will vary due to factors such as the shape and size of each 420 stainless steel component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult your heat treatment provider for full guidance on heat treatment of stainless steel 420 grade.


Certification

420 stainless steel grade is available with BS EN 10204 3.1 mill certificate or cast and analysis certification.  Please request any material certificate requirements when placing your order.


Quality Assured Supply

Stainless Steel 420 specification is supplied in accordance with our ISO 9001 : 2008 registration.


Copyright 2014 TISCO. All Rights Reserved.

Content Us | Powered by Hicheng